Crews survey the damage at the scene of a coal train derailment where 27 cars came off the track near New Hazelton, spilling some coal into Mission Creek. (Emergency Management B.C. photo)

Broken axle caused New Hazelton train derailment: TSB

It could happen again without a different way to inspect trains

The CN freight train that derailed near New Hazelton — spilling coal into Mission Creek — left the track because of a broken axle.

It has happened before, and it can happen again.

That is according to a Transportation Safety Board of Canada (TSB) report released Thursday.

The TSB report concludes that the routine visual inspection could not have detected the fatigue cracks in the axle the cracked part is concealed by wheel bearing components.

The train received a certified car inspection in Prince George four days before the Jan. 19, 2018 derailment. A pull-by inspection was also performed at the last crew change in Smithers, where it left from the morning of the derailment.

“Without alternate strategies to identify fatigue cracks or to predict the likelihood of fatigue cracks developing, problematic axles might not be removed from service in a timely manner, increasing the risk of broken-axle derailments,” concludes the media release that accompanied the report.

“The Board is unaware of any safety action that has been taken as a result of this occurrence,” reads the only sentence under the heading ‘safety action taken.’

tweet

The New Hazelton derailment is not unique. The TSB report reads that from 2008-2017, there were 23 derailments on CN and Canadian Pacific Railway tracks caused by a broken axle. Nine of the axles broke like in the New Hazelton incident: near the journal fillet radius, the area between where the wheel and wheel bearing is mounted on the axle.

The TSB report could not pin down the exact cause of the 52nd of 199 cars’ axle fatigue, but did say, “fatigue cracks are known to result from abnormal cyclic loading due to a number of reasons, such as a wheel tread defect, a general out-of-roundness, or uneven loading from railcar truck components.”

The axle was manufactured in 1981 by Valdunes in France, repaired in January 2000, last maintained with the wheels in Prince George in January 2014. The report said with new wheels and roller bearings, axles can remain in service “up to or beyond 40 years…”

A request has been made with CN for comment on the report and whether the company has plans to address the axle inspection situation.

There were no injuries caused by the derailment and no dangerous goods were involved.

The three crew members — an engineer, conductor and a third member on a familiarization trip — came to a screeching stop when at about 7:18 a.m. while travelling 29 mph when there was a train-initiated emergency brake application. The crew reported no anomalies before the braking.

The B.C. Ministry of Environment and Climate Change Strategy monitored the site clean-up and recovery activities conducted by CN to ensure they met regulatory requirements. About 2,900 tons of thermal coal was dumped, with 2,800 or 97 per cent recovered. A small, unspecified amount of that spilled into Mission Creek.

Along with the 199 cars, 27 of which derailed, there were two locomotives at the head and one mid-train. The 50th to 76th cars derailed.

None of the cars were overloaded. The train weighed 28,069 tons and was 10,785 feet long, according to the TSB report.

editor@interior-news.com

@SmithersNews

Get local stories you won't find anywhere else right to your inbox.
Sign up here

 

TSB map

Eastward view of the derailed cars near New Hazelton. (Interior News file photo with TSB annotations)

Mating fracture surface from the broken axle at the L1 bearing. View toward centre of axle. (TSB photo)

Diagram of the New Hazelton CN train derailment site (TSB diagram)

Fracture surface (view towards centre of axle). The red arrows identify beach marks, and the blue pointers identify ratchet marks. (TSB photo)

Fracture surface (view towards end of axle). The red arrows identify beach marks, and the blue pointers identify ratchet marks. (TSB photo)

Just Posted

Social media a blessing and a curse during time of crisis: B.C. communication expert

‘In moments of crisis, fear is very real and palpable,’ says SFU’s Peter Chow-White

EDITORIAL: How Killer Bunnies helped save my life

“No matter what it is you’re into, it’s important to keep our minds working,” editor Adam Louis writes.

LETTER: Take only what you need

Anne White of Harrison comments on community response to COVID-19.

WATCH: Agassiz-Harrison celebrates National Puppy Day

Facebook followers posted 44 pictures of their furry friends

LETTER: The importance of local grocers

C. and B. Lang Randall reply to an ALR-related letter

B.C. issues guidelines about distancing, reusable bags to grocery stores amid COVID-19

Hand sanitizer and markers to keep lines two metres are apart are needed, province says

No plans to call in military right now to enforce COVID-19 quarantine: Trudeau

Trudeau unveils $7.5M for Kids Help Phone, $9M for vulnerable seniors amid COVID-19

QUIZ: How much do you know about the Olympics?

Put your knowledge to the test with these 12 questions

B.C. announces $3M for food banks to increase capacity during COVID-19

It is not clear how much of the money will flow towards Greater Victoria food banks

B.C. is seeing the highest rate of COVID-19 recovery in Canada, and there’s a few reasons why

British Columbia was one of the first to see rise in COVID-19 cases, and has also switched up testing

World COVID-19 update: U.S. expects 100,000 deaths; Oregon declares disaster

Comprehensive update of world news for Sunday, March 19.

B.C. Ferries passengers staying away, as asked, during COVID-19 pandemic

Ferry corporation says ridership down 70-80 per cent over the last week and a half

Sewers stitch masks to free up supplies for front-line health-care workers

“We have little old ladies sewing up a storm,” said Joan Davis

Most Read