Skip to content

Oversize load collides with Highway 1 overpass in Chilliwack

Traffic disrupted eastbound around Lickman Road over pass Monday morning
12737787_web1_Highway1UnderBridge

By noon Monday, eastbound traffic was still disrupted on Highway 1 after a truck carrying an oversized load collided with the Lickman Road overpass several hours prior.

The back end of the load was seriously damaged, however it did not appear the bridge had sustained any serious damage.

The right lane was littered with debris ripped from the truck, backing up traffic as far west as the Yale Road overpass.

Traffic was also slow along Yale Road West as motorists tried to avoid the accident scene.

Oversize commercial loads require special permits through the Commercial Vehicle Safety and Enforcement (CVSE) office.

Those driving with “extraordinary loads” may require special authorizations and permits not only from CVSE, but also local authorities and utilities.

Those permits are required for vehicles with overweight loads, but also for those that exceed 4.4 metres in width and/or 4.88 metres in height.

One experienced truck driver explained that the permit does not tell a driver which overpasses are under the height of the load being transported so it’s up to a driver to do a route survey in advance.


@PeeJayAitch
paul.henderson@theprogress.com

Like us on Facebook and follow us on Twitter.

12737787_web1_Highway1BackUp
12737787_web1_TruckOverpass-JohnGreenwood
12737787_web1_TruckLickman2
12737787_web1_TruckLickman1
12737787_web1_copy_TruckLickman2
12737787_web1_TruckKnill2
12737787_web1_Truck-Knill1